InnoTooling™ Liquid Plastic Urethane Tooling Materials

Innovative Polymers manufactures Shore A and Shore D hardness polyurethanes that are specifically formulated for tooling applications. We also supply a broad range of RTV silicone rubbers for moldmaking.  Molds, patterns and fixtures cast from polyurethanes or RTV silicone rubbers significantly reduce costs and lead times compared with metal tooling. “Soft” molds are ideal for rapid production of 10 to 100 high quality, thermoplastic-like prototypes. Patterns and fixtures cast from polyurethanes feature excellent dimensional accuracy and stability as well as outstanding abrasion resistance for extended service life.The products are easy to mix and pour, set fast and cure at room temperature.

Key properties include:

Polyurethanes

  • Hardness ranges: Shore 70-95A and Shore 40-60D
  • Minimal shrinkage
  • Low exotherm to accommodate large castings in a single pour
  • Good mechanical characteristics with high elongation and tear strengths
  • Outstanding reproduction of detail

RTV Silicones

  • Shore A hardness ranges from 5-70A.
  • Minimal to no shrinkage
  • Excellent elongation and tear strength
  • Outstanding reproduction of detail

Need technical assistance? Our service team is on-call and ready to help!

Contact us via toll free phone at 800.340.4563, or via e-mail at This email address is being protected from spambots. You need JavaScript enabled to view it. .

 
InnoTooling™ Rigid Urethane Plastic
 (click product to download) 
 
 ProductsPhysical Properties
Click on Product Name to View PDF ColorGel Time, min.Hardness, Shore DTensile Strength, psiElongation, %Tear Strength, pliFlexural Modulus, psiIzod Impact Strength Notched, ft-lb/in
IE-644-02 Translucent Amber 25 +/- 5 80 +/- 5A 1,000 185 150 N/A 6.0
IE-644-03 Amber 25 +/- 5 93 +/- 3A 1,500 113 175 N/A N/A
IE-644-04 Translucent Amber 25 +/- 5 55 +/- 5D 3,000 100 370 45,000 9.0
IE-644-05 Translucent Amber 90 sec. +/- 15 sec 55 +/- 5D 3,000 100 370 45,000 9.0
IE-644-08 Translucent Amber 16 +/- 2 62 +/- 5D 4,900 40 550 90,000 4.0
IE-9040 Clear / Yellow 20 +/- 5 40 +/- 5D 2,000 180 310 N/A N/A
IE-9060 Clear / Yellow 17 +/- 3 55 +/- 5D 3,250 185 585 50,000 14.0
IE-9080 Clear / Yellow 20 +/- 5 80 +/- 5A 1,100 275 150 N/A N/A
 
Silicones Inc. RTV Silicone Rubber 
(click product to download)
 
ProductsPhysical Properties
Click on Product Name to View PDF ColorHardness, Shore ATensile Strength, psiElongation, %Tear Strength, pliVolume/ Surface Restivity, ohms-cmDielectric Strength, volts/milDielectric Constant, 100 HzDissipation Factor
100 Hz
P-Series
P-20 Translucent 22 +/- 4 525 +/- 50 425 +/- 50 120 +/- 25 N/A N/A N/A N/A
P-44 Translucent 42 +/- 4 600 +/- 50 250 +/- 25 120 +/- 20 1 x 1015 500 2.9 0
P-45 Reddish-Brown

45 +/- 4

800 +/- 50 275 +/- 50 160 +/- 15 N/A N/A N/A N/A
P-50 Green 54 +/- 4 750 +/- 50 200 +/- 25 70 +/- 10 5 x 1014 500 2.9 0.02
P-60 Blue 62 +/- 4 900 +/- 90 200 +/- 25 75 +/- 10 N/A N/A N/A N/A
P-90 Red 35 +/- 4 600 +/- 50 415 +/- 30 125 +/- 10 5 x 1014 580 2.8 0.01
P-125 Translucent 40 +/- 4 700 +/- 50 250 +/- 50 90 +/- 15 1 x 1015 500 2.9 0
GI-Series
GI-1000 Blue 32 +/- 4 525 +/- 25 300 +/- 25 120 +/- 10 1 x 1015 500 3.3 0.02
GI-1040 Blue 40 +/- 4 525 +/- 25 225 +/- 25 100 +/- 15 N/A N/A N/A N/A
GI-1100 Blue 25 +/- 4 525 +/- 25 400 +/- 25 140 +/- 15 N/A N/A N/A N/A

*** Physical properties included on in this chart were obtained using various cure schedules.
*** Please refer to each product's data bulletin for the specific cure schedule used to obtain the values shown above.

IAAPA-Member-Logo PPSA-Member-Logo Amug NTA APMM