InnoGreen® USDA BioPreferred® Designated Liquid Urethanes

The United States Department of Agriculture (USDA) manages the BioPreferred product effort that was initiated in 2002 as part of a Farm Bill and expanded in 2008. The goal: to encourage the use ofInnoGreen® USDA BioPreferred® Designated Urethane Rubber renewable feedstocks in products ranging from coatings and adhesives to cleaning agents and lubricants. As an industry leader in manufacturing polyurethanes without mercury or MOCA, we're utilizing our environmentally conscious formulating expertise to create the groundbreaking InnoGreen® BIO Series ---- liquid urethane casting resins that offer measurable carbon benefits directly reduce climate change.

Created for hand- batch and vacuum-assisted casting processes, these formulations contain 27% to 40% soy oil-based polyols, a rapidly renewable feedstock produced as a co-product of soybeans grown and processed as a food source for humans and livestock. Every InnoGreen® urethane casting resin is tested by USDA-approved independent laboratories and certified as USDA BioPreferred®-designated.

InnoGreen® polyurethanes exhibit low viscosity for easy handling/processing and demold in less than 12 hours. Once cured, the polyurethanes exhibit elongations up to 200% and tear strengths high as 115 pli. In addition to casting, the new products are ideal for overmolding biobased foams.


Need technical or sales assistance? Our service team is on-call and ready to help!

Contact us toll free at 800.340.4563 or via e-mail at This email address is being protected from spambots. You need JavaScript enabled to view it. . 


 
InnoGreen® USDA BioPreferred® Designated Liquid Urethanes
Elastomeric Shore A Data
(click product to download)
 
ProductsPhysical Properties
Click on Product Name to View PDF ColorGel Time (min.)Hardness (shore A)Tensile Strength (psi)Elongation (%)Tear Strength (pli)Biobased Content (%)
BIO-30A Tan 17.5 +/- 2.5 30 +/- 5 130 85 20  38
BIO-40A Tan 17.5 +/- 2.5 40 +/- 5 170 80 35  37
BIO-50A Tan 17.5 +/- 2.5 50 +/- 5 325 150 40  36
BIO-60A Tan 17.5 +/- 2.5 55 +/- 5 480 135 60  34
BIO-70A Tan 17.5 +/- 2.5 65 +/- 5 925 150 120  36
BIO-80A Tan 17.5 +/- 2.5 75 +/- 5 1,050 150 115  36
BIO-90A Tan 17.5 +/- 2.5 90 +/- 5 2,000 60 140  27
 
 InnoGreen® USDA BioPreferred® Designated Liquid Urethanes
Rigid Shore D Data
(click product to download)
  
ProductsPhysical Properties
Click on Product Name to View PDF ColorGel Time (min.)Hardness (shore D)Tensile Strength (psi)Elongation (%)Flexural Modulus (psi)Izod Impact Strength
Notched (ft-lb/in)

Biobased Content (%)

BIO-80D Tan 7 +/- 2 80 +/- 5 7,800 10 260,000 0.7 39

*** Physical properties included on in this chart were obtained using various cure schedules.
*** Please refer to each product's data bulletin for the specific cure schedule used to obtain the values shown above.

IAAPA-Member-Logo PPSA-Member-Logo Amug NTA APMM